ON/OFF REGULATOR VALVE LONG FLOWSTOP
![](/img/m/540.jpg)
On / off valve that opens or closes the air flow into the hose line where it is installed. It can be installed on any standard LP regulator hose. Approximate length: 7.8 cm
On / off valve that opens or closes the air flow into the hose line where it is installed. It can be installed on any standard LP regulator hose. Approximate length: 7.8 cm
On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm
O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure.
Designed for placing a buoy or a lifting bag between the backplate and diver´s back. Stainless-steel screws for attaching the pocket to the backplate are included.
Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.
TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.
Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
TDS Goodman type handle made of lightweight anodized aluminum. The height of the handle is adjustable by means of a side screw with a wide knob, allowing it to be adjusted to the size of our hand and/or to the use with or without gloves. It is possible to adjust the height in immersion because it is not necessary to use a wrench.
Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
Manifold with isolation valve for twins mounting. 171 mm for 10/12 long twins. Matt black finish of the military series.
TDS 18650 lithium battery USB-C for Maru 1500 diving light: Ion-Lithium battery 18650 USB-C type, compatible with TDS Maru 1500. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V